GRAVER GRS CMAX TFLAT 1.8 #44

sku: 8559940

GRS® C-Max Graver #0 Onglette

sku: 8559815

This #0 Onglette (Point) GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #1 Onglette

sku: 8559818

This #1 Onglette (Point) GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #2 Onglette

sku: 8559816

This #2 Onglette (Point) GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #3 Onglette

sku: 8559819

This #3 Onglette (Point) GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #36 Tapered Flat

sku: 8559832

This #36 Tapered Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #37 Tapered Flat

sku: 8559833

This #37 Tapered Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #38 Parallel Flat

sku: 8559822

This #38 Parallel Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #38 Tapered Flat

sku: 8559834

This #38 Tapered Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #39 Parallel Flat

sku: 8559823

This #39 Parallel Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #39 Tapered Flat

sku: 8559835

This #39 Tapered Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #4 Onglette

sku: 8559817

This #4 Onglette (Point) GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #40 Parallel Flat

sku: 8559824

This #40 Parallel Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #40 Tapered Flat

sku: 8559836

This #40 Tapered Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #41 Parallel Flat

sku: 8559825

This #41 Parallel Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #41 Tapered Flat

sku: 8559837

This #41 Tapered Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #42 Parallel Flat

sku: 8559826

This #42 Parallel Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #42 Tapered Flat

sku: 8559838

This #42 Tapered Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #43 Parallel Flat

sku: 8559827

This #43 Parallel Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #43 Tapered Flat

sku: 8559839

This #43 Tapered Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #44 Parallel Flat

sku: 8559828

This #44 Parallel Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #44 Tapered Flat

sku: 8559840

This #44 Tapered Flat GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #5 Onglette

sku: 8559820

This #5 Onglette (Point) GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #50 Tapered Round

sku: 8559809

This #50 Tapered Round GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #51 Tapered Round

sku: 8559810

This #51 Tapered Round GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #52 Tapered Round

sku: 8559811

This #52 Tapered Round GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #53 Tapered Round

sku: 8559812

This #53 Tapered Round GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #54 Tapered Round

sku: 8559813

This #54 Tapered Round GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #55 Tapered Round

sku: 8559814

This #55 Tapered Round GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...

GRS® C-Max Graver #56 Tapered Round

sku: 8559821

This #56 Tapered Round GRS® C-Max tungsten carbide graver has two flat alignment areas on the shank of the graver.  The set screws on GRS® QC Tool Holders will contact the flat spots of the graver, ensuring that the graver is loaded accurately...