PUK 0.6mm Diameter Electrodes (Pkg of 10)

sku: 8301499

10 pre-sharpened electrodes 0.6mm diameter, 50mm in length. The thin electrode increases precision by touching the exact spot of weld. Just prior to weld, the electrode pulls back into the handpiece by allowing for a clean and precise weld spot...

PUK 0.8mm Diameter Electrodes (Pkg of 10)

sku: 8300934

10 pre-sharpened tungsten electrodes available in 0.8mm diameter, measure 50mm in length. The thin electrode increases precision by touching the exact spot of weld. Just prior to weld, the electrode pulls back into the handpiece by allowing for a clean...

PUK 0.8mm Electrode Collet

sku: 8300933

 This collet holds 0.8mm diameter electrodes. 

PUK 1.00mm Electrode Collet

sku: 8301503

This collet holds 1.00mm diameter electrodes for use with the PUK welders..

PUK 1.0mm Dia. Extended Electrodes

sku: 8301598

These 1.0mm Diameter electrodes are 200mm long (approx. 7.8") - sold as a pair. The electrode increases precision by touching the exact spot of weld. Just prior to weld, the electrode pulls back into the handpiece by allowing for a clean and precise...

PUK Argon Regulator

sku: 8301516

An important prerequisite for dependable PUK welding results is the correct flow rate of Argon gas. The PUK Flow Regulator enables the exact setting of the recommended 2 liters per minute flow rate. It's precise and it's easy but above all, it’s...

PUK Electrode Collet 0.6mm and 0.5mm

sku: 8300931

This collet holds 0.6mm diameter electrodes. 

PUK Electrode Sharpener

sku: 8301625

Small and convenient, the PUK Electrode Sharpener is a useful accessory for every PUK welding device that conveniently plugs into any standard 110V outlet or can plug into the back of any generation PUK 4, 5, 6, U4 or U5 welder. Care of the electrode...

PUK Foot Switch

sku: 8300993

Foot Switch - Must use for Tack Mode - works with all PUK models. 

PUK Microscope Rubber Eye Flaps

sku: 8301512

Pair of replacement eye flaps for the oculars of the PUK microscopes. 

PUK Pliers with Cable

sku: 8300973

Flat, pointed pliers for holding and handling small workpieces. A galvanic nickel plating gives these pliers optimal conductivity. 

PUK Repl. Bulb for Optic Visor

sku: 8300994

Replacement bulb for the PUK Optic Visor.

Repl. Diamond Wheel Head for PUK Electrode Sharpener Plug In

sku: 8301626

Replacement diamond discs can be changed with ease using the Allen key. Made in Germany.

Repl. Glass for Microscope PUK 5 Welder

sku: 8300966

Replacement shutter glass located at the bottom of the viewing area of the PUK 5 microscope.  

Repl. Handpiece for PUK 4/5/6

sku: 8301628

Replacement Handpiece for the PUK models 4/5/6.

Repl. Handpiece for PUK2 or 3

sku: 8301627

PUK Replacement Handpiece for older style PUK2 or PUK3 welders. 

Repl. Nut for PUK Argon Hose

sku: 8301521

This ferrule screw nut is used for securing the argon hose to the regulator and PUK Controller.

Repl. PUK Classic Optic Visor Only

sku: 8301535

Replacement Classic Optic Visor Only for the PUK 5 Jewelry Welder inclluded in our kit 8301540.  This optic unit is well suited for large workpieces that could not easily fit under a microscope. Equipped with a 2.25X magnification lens.  7.5W...

Repl. PUK Flexible Band Weld Cable

sku: 8301527

Replacement PUK Flexible Band Weld Cable.

SM5.1 Microscope for PUK 5.1 Welders

sku: 8301557

SM5.1 Microscope designed for use with the new PUK 5.1. For kit models see related products. This high-quality microscope has optics with 10X magnification and individual settings establishes the prerequisites for precise work. Eye protection...