Jewelers Carbide Burs, 3/32" Shank - Bearing 6 (1.90mm)

sku: 1250060

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bearing 7 (2.10mm)

sku: 1250070

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bearing 8 (2.30mm)

sku: 1250080

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bearing 9 (2.50mm)

sku: 1250090

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 10 (2.70mm)

sku: 1251100

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 12 (3.10mm)

sku: 1251120

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 14 (3.50mm)

sku: 1251140

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 16 (4.00mm)

sku: 1251160

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 18 (4.50mm)

sku: 1251180

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 20 (5.00mm)

sku: 1251200

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 24 (5.60mm)

sku: 1251240

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 26 (6.30mm)

sku: 1251260

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 28 (7.20mm)

sku: 1251280

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 30 (8.00mm)

sku: 1251300

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 4 (1.50mm)

sku: 1251040

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 6 (1.90mm)

sku: 1251060

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Bud 8 (2.30mm)

sku: 1251080

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 10 (2.70mm)

sku: 1252100

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 12 (3.10mm)

sku: 1252120

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 14 (3.50mm)

sku: 1252140

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 16 (4.00mm)

sku: 1252160

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 18 (4.50mm)

sku: 1252180

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 20 (5.00mm)

sku: 1252200

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 24 (5.60mm)

sku: 1252240

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 26 (6.30mm)

sku: 1252260

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 28 (7.20mm)

sku: 1252280

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 30 (8.00mm)

sku: 1252300

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 4 (1.50mm)

sku: 1252040

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 6 (1.90mm)

sku: 1252060

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cone 8 (2.30mm)

sku: 1252080

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cylinder 26 (6.30mm)

sku: 1253260

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cylinder 30 (8.00mm)

sku: 1253300

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 10 (2.70mm)

sku: 1254100

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 11 (2.90mm)

sku: 1254110

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 12 (3.10mm)

sku: 1254120

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 13 (3.30mm)

sku: 1254130

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 14 (3.50mm)

sku: 1254140

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 15 (3.80mm)

sku: 1254150

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 16 (4.00mm)

sku: 1254160

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 18 (4.50mm)

sku: 1254180

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 20 (5.00mm)

sku: 1254200

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 22 (5.20mm)

sku: 1254220

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 24 (5.60mm)

sku: 1254240

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 26 (6.30mm)

sku: 1254260

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 28 (7.20mm)

sku: 1254280

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 30 (8.00mm)

sku: 1254300

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 4 (1.50mm)

sku: 1254040

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 5 (1.70mm)

sku: 1254050

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 6 (1.90mm)

sku: 1254060

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 7 (2.10mm)

sku: 1254070

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...