Jewelers Carbide Burs, 3/32" Shank - Cylinder 26 (6.30mm)

sku: 1253260

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Cylinder 30 (8.00mm)

sku: 1253300

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 10 (2.70mm)

sku: 1254100

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 11 (2.90mm)

sku: 1254110

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 12 (3.10mm)

sku: 1254120

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 13 (3.30mm)

sku: 1254130

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 14 (3.50mm)

sku: 1254140

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 15 (3.80mm)

sku: 1254150

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 16 (4.00mm)

sku: 1254160

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 18 (4.50mm)

sku: 1254180

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 20 (5.00mm)

sku: 1254200

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 22 (5.20mm)

sku: 1254220

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 24 (5.60mm)

sku: 1254240

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 26 (6.30mm)

sku: 1254260

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 28 (7.20mm)

sku: 1254280

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 30 (8.00mm)

sku: 1254300

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 4 (1.50mm)

sku: 1254040

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 5 (1.70mm)

sku: 1254050

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 6 (1.90mm)

sku: 1254060

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 7 (2.10mm)

sku: 1254070

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 8 (2.30mm)

sku: 1254080

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Hart 9 (2.50mm)

sku: 1254090

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 10 (2.70mm)

sku: 1256100

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 11 (2.90mm)

sku: 1256110

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 12 (3.10mm)

sku: 1256120

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 13 (3.30mm)

sku: 1256130

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 14 (3.50mm)

sku: 1256140

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 15 (3.70mm)

sku: 1256150

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 16 (4.00mm)

sku: 1256160

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 17 (4.30mm)

sku: 1256170

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 18 (4.50mm)

sku: 1256180

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 19 (4.70mm)

sku: 1256190

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 20 (5.00mm)

sku: 1256200

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 22 (5.20mm)

sku: 1256220

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 23 (5.40mm)

sku: 1256230

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 24 (5.60mm)

sku: 1256240

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 25 (5.90mm)

sku: 1256250

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 26 (6.30mm)

sku: 1256260

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 28 (7.20mm)

sku: 1256280

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 29 (7.60mm)

sku: 1256290

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 30 (8.00mm)

sku: 1256300

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 4 (1.50mm)

sku: 1256040

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 5 (1.70mm)

sku: 1256050

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 6 (1.90mm)

sku: 1256060

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 7 (2.10mm)

sku: 1256070

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 8 (2.30mm)

sku: 1256080

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Setting 9 (2.50mm)

sku: 1256090

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Wheel 26 (6.30mm)

sku: 1257260

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Carbide Burs, 3/32" Shank - Wheel 30 (8.00mm)

sku: 1257300

Available in Bearing 90°, Bud, Cone, Cylinder, Hart 45°, Round, Setting, and Wheel. Not all shapes are available in all sizes. Like all carbide burs, these must be run at maximum speed — will chip if started on work at slow speed or...

Jewelers Round 10 (2.70mm) Carbide Bur

sku: 1255100

Individually hand-cut with diamond wheels.Sizes 4 to 8 feature one-piece construction; sizes 9 and larger are securely brazed onto steel shanks.All have fine teeth.All have 3/32" shanks.Made in USA.Like all carbide burs, these must be run at maximum...