10-Hour Timer

sku: 2651912

For timing investment and vulcanization cycles. Just key in hours and minutes, then hit start. Loud beeping alarm sounds after time expires. Features repeat timing: within two minutes after alarm, press start to repeat the previous countdown. ...

3-Peaks Sprue Cutters - Side

sku: 1814082

Known in the jewelry market for it’s quality, the Three Peaks cutters are ideal for cutting off sprues (Up to 4mm) on any casting tree. These rugged sprue cutters feature 60-65 HRC hardened alloy steel construction with 15mm long jaws and...

3-Peaks Sprue Cutters - Standard

sku: 1814081

Known in the jewelry market for it’s quality, the Three Peaks cutters are ideal for cutting off sprues (Up to 4mm) on any casting tree. These rugged sprue cutters feature 60-65 HRC hardened alloy steel construction with 15mm long jaws and...

60-Minute Wind-up Timer

sku: 2651910

This 60-minute model is excellent for timing investment and mold rubber vulcanizing. Windup model with long ring.

Akrovest Wax Wash

sku: 2604520

Spray on wax pattern to reduce surface tension, allowing complete adherence of investment to wax. Nonhazardous. Sold in 8 oz. spray bottle.

Alcohol Lamp with Screw Adjustment

sku: 8131900

Our Alcohol Lamp with Screw Adjustment: Turn the screw to raise/lower wick as needed. Safety cap prevents evaporation of fuel. Faceted bowl can be tipped on angle. Each bowl holds 4 oz. of fuel, measures 4" diameter. One 3/16" diameter wick is supplied...

Alcohol Lamp with Sleeve Adjustment

sku: 8131905

Our Alcohol Lamp with Sleeve Adjustment: Metal sleeve adjusts wick height. Safety cap to prevent evaporation of fuel. Faceted bowl can be tipped on angle. Each bowl holds 4 oz. of fuel, measures 4" diameter. One 1/4" diameter wick is supplied.

Aluminum Mold Frames - 1-7/8" x 2-7/8", Single, 1" Thick

sku: 2602300

Aluminum single mold frame.  Makes a mold which is 2-7/8" x 1-7/8" x 1"(L x W x Thickness).  Does not have predrilled holes in the sides.  

Aluminum Mold Frames - 1-7/8" x 2-7/8", Single, 1-1/4" Thick

sku: 2602400

Aluminum single mold frame.  Makes a mold which is 2-7/8" x 1-7/8" x 1-1/4"(L x W x Thickness).  Does not have predrilled holes in the sides.  

Aluminum Mold Frames - 1-7/8" x 2-7/8", Single, 3/4" Thick

sku: 2602200

Aluminum single mold frame.  Makes a mold which is 2-7/8" x 1-7/8" x 3/4"(L x W x Thickness).  Does not have predrilled holes in the sides.  

Analog Pyrometer & Thermocouple

sku: 2651920

Can be used with any oven to accurately measure oven temperature. Measures temperatures from 100°F to 2,400°F. Accurate to within ±2% of total reading. Features large needle indicator for easy reading. Includes Type K...

ARBE 2-3/4 Quart Wax Injector 110V

sku: 2652267

Extremely well-built units designed for reliability and performance. The 2-3/4 Quart and 4 Quart models differ only in size and capacity. Both feature: Heated, sealed nozzle which won't leak or clog Large, easy-to-remove and tightly...

ARBE 4 Quart Large Wax Injector - 110V

sku: 2652295

This 4 quart, 110V unit is extremely well-built and designed for reliability as well as performance. The 2-3/4 Quart and 4 Quart models differ only in size and capacity. Both feature: Heated, sealed nozzle which won't leak or clog Large,...

ARBE Digital Wax Injector - 1-1/3 QT - 110V

sku: 2654957

Manufactured with durability and quality, this 1-1/3 Quart Arbe Digital Wax Injector is the perfect wax injector for small shops with space constraints and for those model makers that need to make a single pattern or a short run. Complete with a steel...

ARBE Digital Wax Injector- 1-1/3 QT with Hand Pump -110V

sku: 2654955

Manufactured with durability and quality, this 110V, 1-1/3 Quart Arbe Digital Wax Injectors uses a hand pump for operation.  It is the perfect size wax injector for small shops with space constraints and for any model maker who needs to make a...

ARBE Dual-Control Deluxe Vulcanizer - 110V

sku: 2651950

Two independent thermostats control each platen separately, so you get the exact temperature you need for the top and bottom of your mold. Ideal for the new 0% shrinkage rubbers (such as Castaldo No-Shrink Pink) that demand precise temperature control...

ARBE Hand Pump 2-3/4 Quart Wax Injector - 110V

sku: 2654950

A well-built hand pump wax injector with an air pressure gauge that reads up to 30 PSI and an ultra-sensitive thermostat that ensures precise and consistent temperature control up to 250° F. Insert a thermometer (not included) in the port on the cover...

ARBE Junior Vulcanizer 110V

sku: 2652225

Heavy-duty cast-iron and aluminum construction. Stainless steel heating platens. Large handle and sturdy 1" diameter pressure screw. Two large diameter guide rods keep platens in alignment. Thermostat with dial for accurate temperature control up to...

ARBE Mini 1-1/3 Quart Wax Injector - 110V

sku: 2652270

This 110V wax injector is perfect for the small shop or for special waxes. Wax capacity is approximately 2.6lbs (1-1/3 quarts).  Has all the features of the larger ARBE injectors in a space-saving unit. Air pressure operation with a 2" diameter...

ARBE Mini 1-1/3 Quart Wax Injector - 220V

sku: 2652720

This 220V wax injector is perfect for the small shop or for special waxes. Wax capacity is approximately 2.6lbs (1-1/3 quarts).  Has all the features of the larger ARBE injectors in a space-saving unit. Air pressure operation with a 2" diameter...

ARBE Wax Carver - 110V

sku: 2651980

This 110V, easy-to-use carver features a heavy-duty variable-power rheostat that enables precise, consistent temperature control from approximately 100° to 1200° F. Includes a sturdy, yet comfortable handpiece with ultra-flexible 35" power cord, built-in...

ARBE Wax Carver - Black Tip only

sku: 2651988

Optional Flat Needle Nose Black tip for the ARBE Wax Carver. Increase the versatility of your ARBE wax carver by adding different tips to best suit the jobs you do the most.  

ARBE Wax Carver - Green Tip only

sku: 2651987

Optional Straight Flat Sharp Green) tip for the ARBE Wax Carver. Increase the versatility of your ARBE wax carver by adding different tips to best suit the jobs you do the most.  

ARBE Wax Carver - Orange Tip only

sku: 2651986

Optional Straight Needle Nose (Orange) tip for the ARBE Wax Carver. Increase the versatility of your ARBE wax carver by adding different tips to best suit the jobs you do the most.  

ARBE Wax Carver - Red Tip only

sku: 2651983

Optional Broad Spatula (Red) tip for the ARBE Wax Carver. Increase the versatility of your ARBE wax carver by adding different tips to suit the jobs you do the most.  

ARBE Wax Carver - Yellow Tip only

sku: 2651984

Optional Bent Needle Nose (Yellow) tip for the ARBE Wax Carver. Increase the versatility of your ARBE wax carver by adding different tips to best suit the jobs you do the most.  

Auto-Vac Investing Machine

sku: 2652181

Features:Mixes and fills in a controlled environment to help reduce casting defects.Reduces exposure to harmful investment dust.Easy to use and clean.Includes 2 stands (47-1/4" and 55" high) so you can choose the most convenient working height.Take the...

Bell Jar - 12" ID

sku: 2604156

Made of the highest grade plastic, this 12" inside diameter by 12" inside height bell jar is to be used on a vacuum table so the bottom is ground smooth for a tight vacuum seal on the rubber pad. The outside diameter measures 15.25" with an outside...

Bell Jar - 8.5"

sku: 2604175

Made of the highest grade plastic, this 8-1/2" inside diameter by 8-1/4" inside height bell jar is to be used on a vacuum table so the bottom is ground smooth for a tight vacuum seal on the rubber pad. The outside diameter measures 10.25" with an...

Bench Knife

sku: 2603059

An all-purpose knife for scraping and cutting. Has 1-3/4" steel blade mounted in a hardwood handle. Measures 5-1/4" overall length.  

Bergeon Heavy-Duty Side Cutter

sku: 1814075

Special linkage of this top-quality cutter multiples your hand pressure many times to give a full, clean cut. Helps reduce hand fatigue from constant cutting. Extra-long handles provide additional leverage so cutting is easier. Hardened steel jaws have a...

Binder ONLY for R&R® Platinum Investment

sku: 2604076

This is the binder for the R&R Platinum,  The acid-based binder gets mixed with investment for casting platinum alloys. This investment and binder provide platinum casters with a consistent, acid-based mixture that does not separate, resulting...

Blades for Soft Grip Knife #11, Pkg. of 5

sku: 2603045

This #11 Straight steel blade will only work with the Soft Grip Handle.  

Blades for Soft Grip Knife #16, Pkg. of 5

sku: 2603048

This #16 steel blade will only work with the Soft Grip Handle.  

Brick Oven Cement

sku: 2651437

A permanent high-temperature refractory cement for all types of firebrick kilns. Simply mix the powder with tap water and apply. 1 lb. bag. (Shipping weight 1.16 lbs.)

Bunsen Burner

sku: 8111600

For heating wax and wax-carving tools. Can be used with artificial or natural gas. Has adjustable needle valve for gas control to produce a hot brush flame down to a needle flame with intense heat. Measures 4-1/2"H, 3" base diameter.

Burno Crucibles - 100 dwt

sku: 2608550

For quick torch melting. These clay-bonded fused silica crucibles are extremely efficient due to protective heat-holding cover and handy pouring opening. Long-lasting. 3 sizes: 25 dwt, 50 dwt, and 100 dwt capacity.

Burno Crucibles - 25 dwt

sku: 2608650

For quick torch melting. These clay-bonded fused silica crucibles are extremely efficient due to protective heat-holding cover and handy pouring opening. Long-lasting. 3 sizes: 25 dwt, 50 dwt, and 100 dwt capacity.

Burno Crucibles - 50 dwt

sku: 2608600

For quick torch melting. These clay-bonded fused silica crucibles are extremely efficient due to protective heat-holding cover and handy pouring opening. Long-lasting. 3 sizes: 25 dwt, 50 dwt, and 100 dwt capacity.

Burno Tongs

sku: 1950050

Shaped to hold all Burno crucibles. Measure 10" long.

Busch® 22-Facet Carbide Burnishers

sku: 8112173

22-Facet Carbide Burnisher from Busch - provides a medium finish.  Exceptionally well made tools used to remove porosity and surface imperfections from cast pieces by moving metal over the defect. Burnisher tip is rounded for safety.  Maximum...

Busch® 36-Facet Carbide Burnisher

sku: 8112174

36-Facet Carbide Burnisher from Busch - provides a fine finish.  Exceptionally well made tools used to remove porosity and surface imperfections from cast pieces by moving metal over the defect. Burnisher tip is rounded for safety.  Maximum...

Busch® Burs - Wax & Plastic, Fig. 260a - 1.8mm

sku: 1218170

Very coarse cut for carving wax. Will not clog with wax like regular burs. 3/32" shanks. Diameters: 1.8, 2.3, 3.1, and 5.0mm.

Busch® Burs - Wax & Plastic, Fig. 260a - 2.3mm

sku: 1218180

Very coarse cut for carving wax. Will not clog with wax like regular burs. 3/32" shanks. Diameters: 1.8, 2.3, 3.1, and 5.0mm.

Busch® Burs - Wax & Plastic, Fig. 260a - 3.1mm

sku: 1218190

Very coarse cut for carving wax. Will not clog with wax like regular burs. 3/32" shanks. Diameters: 1.8, 2.3, 3.1, and 5.0mm.

Busch® Burs - Wax & Plastic, Fig. 260a - 5.0mm

sku: 1218200

Very coarse cut for carving wax. Will not clog with wax like regular burs. 3/32" shanks. Diameters: 1.8, 2.3, 3.1, and 5.0mm.

Carbide Rotary Burnisher - 3/32" Shank - 12-Facet Small

sku: 8112170

The fastest tool for removing porosity on gold, platinum and silver. Our Rotary Burnishers are patented creations made of highly polished tungsten carbide and mounted on 3/32" (2.35mm) shanks. Each burnisher has a 12-, 18- or 36-facet sidewall...

Carbide Rotary Burnisher - 3/32" Shank - 18-Facet Large

sku: 8112175

The fastest tool for removing porosity on gold, platinum and silver. Our Rotary Burnishers are patented creations made of highly polished tungsten carbide and mounted on 3/32" (2.35mm) shanks. Each burnisher has a 12-, 18- or 36-facet sidewall...

Carbide Rotary Burnisher - 3/32" Shank - 18-Facet Small

sku: 8112171

The fastest tool for removing porosity on gold, platinum and silver. Our Rotary Burnishers are patented creations made of highly polished tungsten carbide and mounted on 3/32" (2.35mm) shanks. Each burnisher has a 12-, 18- or 36-facet sidewall...

Carbide Rotary Burnisher - 3/32" Shank - 36-Facet Large

sku: 8112176

The fastest tool for removing porosity on gold, platinum and silver. Our Rotary Burnishers are patented creations made of highly polished tungsten carbide and mounted on 3/32" (2.35mm) shanks. Each burnisher has a 12-, 18- or 36-facet sidewall...