Cuttlefish Bone

sku: 2653000

For casting small objects by pressing model directly into cuttlefish. Soft shell makes a smooth-walled mold. Cut sprues, gates and vents into the wall with a sharp knife. Supplied in random sizes. Package contains 4 to 6 pieces weighing approximately 1/2...

Digital Pyrometer & Thermocouple

sku: 2651914

Enjoy digital accuracy on a modest budget with this reliable digital Pyrometer and Thermocouple. Measures temperatures up to 1,999° F. Accurate to within ±2% of total reading. Large LCD for easy reading even in bright light ...

Digital Vacuum Wax Injection System - 120V

sku: 2654144

An advanced system for delivering consistent, repeatable wax patterns with the best possible surface finish. Draws air out of the mold before injection, eliminating the air bubbles that result in wax pattern defects. Injects wax immediately after...

Digital Vacuum Wax Injection System - 240V

sku: 2654145

An advanced system for delivering consistent, repeatable wax patterns with the best possible surface finish. Draws air out of the mold before injection, eliminating the air bubbles that result in wax pattern defects. Injects wax immediately after...

Digital Vacuum Wax Injector Components - Replacement O-Ring

sku: 2654139

Although there are substantial savings when purchased as a complete system (see "Related Products" below), our Digital Vacuum Wax Injection System is also sold as component parts: the Digital Vacuum Wax Injector alone and the Controller/Clamp that you...

Digital Vacuum Wax Injector ONLY, 120V

sku: 2654140

Although there are substantial savings when purchased as a complete system our Digital Vacuum Wax Injection System is also sold as a Digital Vacuum Wax Injector alone and then at a later date, you can add the Controller/Clamp for additional speed and...

Econo Extra-Long Wire Ingot Mold

sku: 2681201

One-piece cast-iron mold with handle used for making wire ingots in three sizes: 5/16" x 1/4" x 9-5/8" 1/4" x 1/4" x 9-5/8" 7/32" x 1/4" x 9-5/8" Measures 15" long overall.

Econo Wax Needle File Set

sku: 2652315

5-1/2" long non-clogging files for rough wax filing in six shapes: Crochet, Equaling, Half-Round, Round, Square and Three-Square.

Economy 8" Vulcanite Wax File

sku: 7040020

Widely spaced teeth prevent wax from clogging this file.  One end is coarse, the other fine. Half-round shape. Measures 8" overall length.  Made in India. 

Economy Plastic Knife Handle

sku: 2603052

Our economy knife blade handle is made of tough plastic and contoured to fit your hand comfortably.  Fits #10A (Wide Angle), #11 (Straight) and #12 (Curved) Swann Morton® Blades which are sold separately.  Handle is made in India 

Electric Melter Furnace, (0.5kg)

sku: 2651600

This 0.5kg furnace comes complete with pyrometer, graphite crucible, crucible tongs and graphite stirrer.  Easy to operate, solid steel construction with a high-temperature ceramic chamber which enables extended melting time. Built-in auto...

Electric Melter Furnace, (1kg)

sku: 2651602

This 1kg furnace comes complete with pyrometer, graphite crucible, crucible tongs and graphite stirrer.  Easy to operate, solid steel construction with a high-temperature ceramic chamber which enables extended melting time. Built-in auto stabilizer...

Electric Melter Furnace, (3kg with Tilt)

sku: 2651606

This 3kg furnace has a tilt feature which makes it easy to pour with fewer spills and improved heat retention.  It has all the same features of the standard 3kg model so it comes complete with pyrometer, graphite crucible, crucible tongs and...

Electric Melter Furnace, (3kg)

sku: 2651604

This 3kg furnace comes complete with pyrometer, graphite crucible, crucible tongs and graphite stirrer.  Easy to operate, solid steel construction with a high-temperature ceramic chamber which enables extended melting time. Built-in auto stabilizer...

Electric Waxing Tray - Electric Waxing Tray 110V

sku: 2652358

This easy-to-clean, 3-well wax tray is digitally controlled for temperature adjustment up to approximately 260° F.  Two compartments measure 1-3/4" L x 1-3/8"W x 3/4" deep, large compartment measures 3" L x 2" W x 3/4" deep...

Ferris® Blue Injection Wax Pellets - 5 lbs.

sku: 2618142

Ferris Blue Wax pellets are a hard wax with excellent memory specially formulated for intricate, detailed molds. Cools quickly and pulls easily from molds. Injection temperature: 150–160°F (65–71°C). This is a 5 lb. box.  Also available...

Ferris® Blue Injection Wax Pellets 50 lb. Box

sku: 2618151

Ferris Blue Wax oellets are a hard wax with excellent memory specially formulated for intricate, detailed molds. Cools quickly and pulls easily from molds. Injection temperature: 150–160°F (65–71°C). This is a 5 lb. box.  Also available in...

Ferris® Cowdery Profile - Round Solid Purple 1.0mm

sku: 2619580

Cowdery Profiles by Ferris were uniquely designed to save jewelry designers significant time creating prong settings, clasps, hinges or other complex shapes quickly and easily. These specially designed, precision-formed wax extrusions can be used...

Ferris® Cowdery Profiles - 3 Prong Blue 8mm

sku: 2619510

Cowdery Profiles by Ferris were uniquely designed to save jewelry designers significant time creating prong settings, clasps, hinges or other complex shapes quickly and easily. These specially designed, precision-formed wax extrusions can be used...

Ferris® Cowdery Profiles - Round Solid Blue 4.0mm

sku: 2619380

Cowdery Profiles by Ferris were uniquely designed to save jewelry designers significant time creating prong settings, clasps, hinges or other complex shapes quickly and easily. These specially designed, precision-formed wax extrusions can be used...

Ferris® Cowdery Profiles - Round Tube Blue 5mm (0.75mm wall)

sku: 2619420

Cowdery Profiles by Ferris were uniquely designed to save jewelry designers significant time creating prong settings, clasps, hinges or other complex shapes quickly and easily. These specially designed, precision-formed wax extrusions can be used...

Ferris® Cowdery Profiles - Round Tube Blue 6.0mm (0.75mm wall)

sku: 2619425

Cowdery Profiles by Ferris were uniquely designed to save jewelry designers significant time creating prong settings, clasps, hinges or other complex shapes quickly and easily. These specially designed, precision-formed wax extrusions can be used...

Ferris® Cowdery Profiles - Square Tube Blue 2.0mm (0.75mm wall)

sku: 2619465

Cowdery Profiles by Ferris were uniquely designed to save jewelry designers significant time creating prong settings, clasps, hinges or other complex shapes quickly and easily. These specially designed, precision-formed wax extrusions can be used...

Ferris® Cowdery Profiles - Square Tube Blue 4.0mm (0.75mm wall)

sku: 2619485

Cowdery Profiles by Ferris were uniquely designed to save jewelry designers significant time creating prong settings, clasps, hinges or other complex shapes quickly and easily. These specially designed, precision-formed wax extrusions can be used...

Ferris® File-A-Wax® Blocks - 1 lb. Block Blue

sku: 2615300

These 1 lb. blocks measure 6" long x 3-1/2" wide x 1-1/2" thick. Blue File-A-Wax is recommended for rounded surfaces and less intricate designs since it is more flexible than the other colors. Good for hand carving, but not recommended for use with...

Ferris® File-A-Wax® Blocks - 1 lb. Block Green

sku: 2615100

These 1 lb. blocks measure 6" long x 3-1/2" wide x 1-1/2" thick. The Green File-A-Wax is a very hard wax which cannot be flexed making it ideal for sharp edges and intricate carvings as well as delicate engraving.   Fair for hand carving, but...

Ferris® File-A-Wax® Blocks - 1 lb. Block Purple

sku: 2615200

These 1 lb. blocks measure 6" long x 3-1/2" wide x 1-1/2" thick. The Purple File-A-Wax is a terrific general purpose carving wax as it is hard with some flexibility.  Excellent for hand carving, but only fair if you want to use with...

Ferris® File-A-Wax® Blocks - 1/2 lb. Block Blue

sku: 2615250

These 1/2 lb. blocks measure 3.5"x3.5"x  1-1/8" thick.  Blue File-A-Wax is recommended for rounded surfaces and less intricate designs since it is more flexible than the other colors. Good for hand carving, but not recommended for use with...

Ferris® File-A-Wax® Blocks - 1/2 lb. Block Green

sku: 2615050

These 1/2 lb. blocks measure 3.5"x3.5"x1-1/8" thick.  The Green File-A-Wax is a very hard wax which cannot be flexed making it ideal for sharp edges and intricate carvings as well as delicate engraving.   Fair for hand carving, but...

Ferris® File-A-Wax® Blocks - 1/2 lb. Block Purple

sku: 2615150

These 1/2 lb. blocks measure 3.5"x3.5"x  1-1/8" thick. Purple File-A-Wax is a terrific general purpose carving wax as it is hard with some flexibility.  Excellent for hand carving, but only fair if you want to use with high-speed CNC machines...

Ferris® File-A-Wax® Slices - 1 lb. Blue

sku: 2615015

These Blue File-A-Wax Slices are packaged in a 1 lb. package with assorted thicknesses from 3/16" to 1" thick.  Slices all measure 3-5/8"L x 1-1/2"W.  Blue is recommended for rounded surfaces and less intricate designs since it is more flexible...

Ferris® File-A-Wax® Slices - 1 lb. Green

sku: 2615005

These Green File-A-Wax Slices are packaged in a 1/2 lb. package with assorted thicknesses: from 3/16" to 1" thick.  Slices all measure 3-5/8"L x 1-1/2"W.  Green is a very hard wax which cannot be flexed making it ideal for sharp edges and...

Ferris® File-A-Wax® Slices - 1 lb. Purple

sku: 2615010

These Purple File-A-Wax Slices are packaged in a 1/2 lb package with assorted thicknesses: from 3/16" to 1" thick.  Slices all measure 3-5/8"L x 1-1/2"W.  Purple is a terrific general purpose carving wax as it is hard with some flexibility...

Ferris® File-A-Wax® Slices - 1/2 lb. Blue

sku: 2615030

These Blue File-A-Wax Slices are packaged in a 1/2 lb package with assorted thicknesses: from 1/8" to 1/4" thick.  Slices all measure 3-5/8"L x 1-1/2"W.  Blue is recommended for rounded surfaces and less intricate designs since it is more...

Ferris® File-A-Wax® Slices - 1/2 lb. Green

sku: 2615020

These Green File-A-Wax Slices are packaged in a 1/2 lb. package with assorted thicknesses: from 1/8" to 1/4" thick.  Slices all measure 3-5/8"L x 1-1/2"W.  Green is a very hard wax which cannot be flexed making it ideal for sharp edges and...

Ferris® File-A-Wax® Slices - 1/2 lb. Purple

sku: 2615025

These Purple File-A-Wax Slices are packaged in a 1/2 lb package with assorted thicknesses: from 1/8" to 1/4" thick.  Slices all measure 3-5/8"L x 1-1/2"W.  Purple is a terrific general purpose carving wax as it is hard with some...

Ferris® File-A-Wax® Tubes - B-1062 Blue

sku: 2615500

This solid tube has a diameter of 1-1/16" and is 6" in length.  Ideal for making items such as cuff links, charms and medallions.  Blue File-A-Wax is recommended for rounded surfaces and less intricate designs since it is more flexible...

Ferris® File-A-Wax® Tubes - B-1062 Green

sku: 2615450

This solid tube has a diameter of 1-1/16" and is 6" in length.  Ideal for making items such as cuff links, charms and medallions. The Green File-A-Wax is a very hard wax which cannot be flexed making it ideal for sharp edges and intricate carvings...

Ferris® File-A-Wax® Tubes - B-1062 Purple

sku: 2615460

This solid tube has a diameter of 1-1/16" and is 6" in length.  Ideal for making items such as cuff links, charms and medallions. Purple File-A-Wax is a terrific general purpose carving wax as it is hard with some flexibility.  Excellent...

Ferris® File-A-Wax® Tubes - B-1062 Turquoise

sku: 2615448

This solid tube has a diameter of 1-1/16" and is 6" in length.  Ideal for making items such as cuff links, charms and medallions. Turquoise File-A-Wax will only be available while supplies last.  This unique wax was designed for use with...

Ferris® File-A-Wax® Tubes - B-875 Blue

sku: 2615400

This solid tube has a diameter of 7/8" and is 6" in length.  Ideal for making items such as cuff links, charms and medallions. Blue File-A-Wax is recommended for rounded surfaces and less intricate designs since it is more flexible than the...

Ferris® File-A-Wax® Tubes - B-875 Green

sku: 2615380

This solid tube has a diameter of 7/8" and is 6" in length.  Ideal for making items such as cuff links, charms and medallions. The Green File-A-Wax is a very hard wax which cannot be flexed making it ideal for sharp edges and intricate carvings as...

Ferris® File-A-Wax® Tubes - B-875 Purple

sku: 2615385

This solid tube has a diameter of 7/8" and is 6" in length.  Ideal for making items such as cuff links, charms and medallions.  Purple File-A-Wax is a terrific general purpose carving wax as it is hard with some flexibility. ...

Ferris® File-A-Wax® Tubes - B-875 Turquoise

sku: 2615378

This solid tube has a diameter of 7/8" and is 6" in length. Ideal for making items such as cuff links, charms and medallions. Turquoise File-A-Wax will only be available while supplies last.  This unique wax was designed for use with high-speed CNC...

Ferris® File-A-Wax® Tubes - T-100 Blue

sku: 2615830

This flat top ring tube measures 1"Wx1-1/8"Hx6"L with a 5/8" diameter hole.   Blue File-A-Wax is recommended for rounded surfaces and less intricate designs since it is more flexible than the other colors. Good for hand carving, but not...

Ferris® File-A-Wax® Tubes - T-100 Green

sku: 2615825

This flat top ring tube measures 1"Wx1-1/8"Hx6"L with a 5/8" diameter hole.   The Green File-A-Wax is a very hard wax which cannot be flexed making it ideal for sharp edges and intricate carvings as well as delicate engraving.   Fair...

Ferris® File-A-Wax® Tubes - T-100 Purple

sku: 2615826

This flat top ring tube measures 1"Wx1-1/8"Hx6"L with a 5/8" diameter hole.   Purple File-A-Wax is a terrific general purpose carving wax as it is hard with some flexibility.  Excellent for hand carving, but only fair if you want to...

Ferris® File-A-Wax® Tubes - T-1062 Blue

sku: 2615820

This 1-1/6" diameter ring tube has a centered 5/8" diameter hole.  Measures 6" in length. Blue File-A-Wax is recommended for rounded surfaces and less intricate designs since it is more flexible than the other colors. Good for hand carving, but...

Ferris® File-A-Wax® Tubes - T-1062 Green

sku: 2615810

This 1-1/6" diameter ring tube has a centered 5/8" diameter hole.  Measures 6" in length. The Green File-A-Wax is a very hard wax which cannot be flexed making it ideal for sharp edges and intricate carvings as well as delicate engraving. ...

Ferris® File-A-Wax® Tubes - T-1062 Purple

sku: 2615815

This 1-1/6" diameter ring tube has a centered 5/8" diameter hole.  Measures 6" in length. Purple File-A-Wax is a terrific general purpose carving wax as it is hard with some flexibility.  Excellent for hand carving, but only fair if you...