SVTN-S Right Angle Handpiece - Optional 3mm Collet

sku: 8505255

Right angle handpiece with a telescopic head. Maximum extension is 3-1/4". Excellent for hard-to-reach areas. Complete with 1/8" and 3/32" collets as well as a wrench for changing collets. Replacement collets available. Optional 3mm collet also...

SVTN-S Right Angle Handpiece - Replacement 1/8" Collet

sku: 8505350

Right angle handpiece with a telescopic head. Maximum extension is 3-1/4". Excellent for hard-to-reach areas. Complete with 1/8" and 3/32" collets as well as a wrench for changing collets. Replacement collets available. Optional 3mm collet also...

SVTN-S Right Angle Handpiece - Replacement 3/32" Collet

sku: 8505340

Right angle handpiece with a telescopic head. Maximum extension is 3-1/4". Excellent for hard-to-reach areas. Complete with 1/8" and 3/32" collets as well as a wrench for changing collets. Replacement collets available. Optional 3mm collet also...

T3 Vacuum Pump - 1/2 HP - set to 220V

sku: 2651754

This unit, while 110V~220V Dual Cycle, arrives set to 220V with a 220V US plug attached.  Its 1/2 HP unit motor provides 3 CFM for removing air bubbles from investment or pulling gases from flasks during casting so that molten metal can flow...

Technique Hammer Handpiece without Duplex

sku: 8501295

The Technique Hammer Handpiece features a lightweight, slender body that you can hold comfortably for long periods. This popular handpiece is used for stone setting and texturing and operates with very little vibration. Comes complete with screw-in...

Technique Handpiece - Optional 1/8" Collet

sku: 8502058

A lightweight, vibration-free, high-precision handpiece with quick change flip-lever chuck release. 3/32" collets opens when lever is pushed in either direction so it's ideal for both right-handers and left-handers. Special chuck release mechanism...

Technique Handpiece - Replacement 3/32" Collet

sku: 8502057

A lightweight, vibration-free, high-precision handpiece with quick change flip-lever chuck release. 3/32" collets opens when lever is pushed in either direction so it's ideal for both right-handers and left-handers. Special chuck release mechanism...

Technique Handpiece with 3/32" Collet

sku: 8502054

A lightweight, vibration-free, high-precision handpiece with quick change flip-lever chuck release. 3/32" collets opens when lever is pushed in either direction so it's ideal for both right-handers and left-handers. Special chuck release mechanism...

Telescoping Flex Shaft Hanger

sku: 8500509

Now you can adjust the height of your flex shaft motor in seconds. Telescoping hanger will extend 42” above your workbench. Height adjustments are made easily with the thumbscrew. Made with a solid mounting base that screws firmly into your bench...

Tool Holder #62 for Turbo Air Lapper UTR-70

sku: 8502248

Replacement Tool Holder #62 accepts 1/8" flat tools.

Tool Holder #64 for Turbo Air Lapper UTR-70

sku: 8502246

Replacement Tool Holder #64 accepts 1mm flat and 3mm round tools. 

Tool Holder #65 for Turbo Air Lapper UTR-70

sku: 8502247

Replacement Tool Holder #65 accepts 1mm flat tools.

Tool Holder 0.5mm Flat for ULTRAMAX® MF & Mini

sku: 5083120

Create your own polishing tools by inserting 0.5mm flat stones and lapping tools into the steel clamp style holder. The 6mm threaded end fits our Ultramax MF and Ultramax Mini handpiece.

Tool Holder 1.0mm Flat for ULTRAMAX® MF & Mini

sku: 5083122

Create your own polishing tools by inserting 1.0mm flat stones and lapping tools into the steel clamp style holder. The 6mm threaded end fits our Ultramax MF and Ultramax Mini handpiece.

Tool Holder 1/8" Flat for ULTRAMAX® MF & Mini

sku: 5083128

Create your own polishing tools by inserting 1/8" flat stones and lapping tools into the steel clamp style holder. The 6mm threaded end fits our Ultramax MF and Ultramax Mini handpiece.

Tool Holder 1/8" Round for ULTRAMAX® MF & Mini

sku: 5083134

Create your own polishing tools by inserting 1/8" round stones and lapping tools into the steel clamp style holder. The 6mm threaded end fits our Ultramax MF and Ultramax Mini handpiece.

Tool Holder 2.0mm Flat for ULTRAMAX® MF & Mini

sku: 5083124

Create your own polishing tools by inserting 2.0mm flat stones and lapping tools into the steel clamp style holder. The 6mm threaded end fits our Ultramax MF and Ultramax Mini handpiece.

Tool Holder 3.0mm Flat for ULTRAMAX® MF & Mini

sku: 5083126

Create your own polishing tools by inserting 3.0mm flat stones and lapping tools into the steel clamp style holder. The 6mm threaded end fits our Ultramax MF and Ultramax Mini handpiece.

Tool Holder 3.0mm Round for ULTRAMAX® MF & Mini

sku: 5083133

Create your own polishing tools by inserting 3.0mm round stones and lapping tools into the steel clamp style holder. The 6mm threaded end fits our Ultramax MF and Ultramax Mini handpiece.

Tool Holders for UM-1200 - Flat 0.5mm

sku: 5000111

Use these 8mm threaded tool holders in UM-1200 for holding ceramic stones, diamond machine files and lapping tools. Important note: Always use the Bench Jig (supplied with the UM-1200) when changing tools or tool holders to avoid damaging...

Tool Holders for UM-1200 - Flat 0.8mm

sku: 5000131

Use these 8mm threaded tool holders in UM-1200 for holding ceramic stones, diamond machine files and lapping tools. Important note: Always use the Bench Jig (supplied with the UM-1200) when changing tools or tool holders to avoid damaging...

Tool Holders for UM-1200 - Flat 1.0mm

sku: 5000108

Use these 8mm threaded tool holders in UM-1200 for holding ceramic stones, diamond machine files and lapping tools. Important note: Always use the Bench Jig (supplied with the UM-1200) when changing tools or tool holders to avoid damaging...

Tool Holders for UM-1200 - Flat 1/8"

sku: 5000133

Use these 8mm threaded tool holders in UM-1200 for holding ceramic stones, diamond machine files and lapping tools. Important note: Always use the Bench Jig (supplied with the UM-1200) when changing tools or tool holders to avoid damaging...

Tool Holders for UM-1200 - Flat 2.0mm

sku: 5000132

Use these 8mm threaded tool holders in UM-1200 for holding ceramic stones, diamond machine files and lapping tools. Important note: Always use the Bench Jig (supplied with the UM-1200) when changing tools or tool holders to avoid damaging...

Tool Holders for UM-1200 - Flat 3.0mm

sku: 5000110

Use these 8mm threaded tool holders in UM-1200 for holding ceramic stones, diamond machine files and lapping tools. Important note: Always use the Bench Jig (supplied with the UM-1200) when changing tools or tool holders to avoid damaging...

Tool Holders for UM-1200 - Round 1.0mm

sku: 5000134

Use these 8mm threaded tool holders in UM-1200 for holding ceramic stones, diamond machine files and lapping tools. Important note: Always use the Bench Jig (supplied with the UM-1200) when changing tools or tool holders to avoid damaging...

Tool Holders for UM-1200 - Round 1/8"

sku: 5000137

Use these 8mm threaded tool holders in UM-1200 for holding ceramic stones, diamond machine files and lapping tools. Important note: Always use the Bench Jig (supplied with the UM-1200) when changing tools or tool holders to avoid damaging...

Tool Holders for UM-1200 - Round 2.0mm

sku: 5000135

Use these 8mm threaded tool holders in UM-1200 for holding ceramic stones, diamond machine files and lapping tools. Important note: Always use the Bench Jig (supplied with the UM-1200) when changing tools or tool holders to avoid damaging...

Tool Holders for UM-1200 - Round 2.35mm

sku: 5000136

Use these 8mm threaded tool holders in UM-1200 for holding ceramic stones, diamond machine files and lapping tools. Important note: Always use the Bench Jig (supplied with the UM-1200) when changing tools or tool holders to avoid damaging...

Tool Holders for UM-1200 - Round 3.0mm

sku: 5000109

Use these 8mm threaded tool holders in UM-1200 for holding ceramic stones, diamond machine files and lapping tools. Important note: Always use the Bench Jig (supplied with the UM-1200) when changing tools or tool holders to avoid damaging...

Tool Holders, 6mm Thread - Medium Flat 0.5mm

sku: 5083495

Create your own polishing tools by inserting stones and lapping tools into these steel clamps. All of these Clamp Tool Holders can be used in the standardultrasonic handpeices supplied with ULTRAMAXDF, SF, DF Power, and SF Power. All have 6mm...

Tool Holders, 6mm Thread - Medium Flat 0.8mm

sku: 5083500

Create your own polishing tools by inserting stones and lapping tools into these steel clamps. All of these Clamp Tool Holders can be used in the standardultrasonic handpeices supplied with ULTRAMAXDF, SF, DF Power, and SF Power. All have 6mm...

Tool Holders, 6mm Thread - Medium Flat 1.0mm

sku: 5083502

Create your own polishing tools by inserting stones and lapping tools into these steel clamps. All of these Clamp Tool Holders can be used in the standardultrasonic handpeices supplied with ULTRAMAXDF, SF, DF Power, and SF Power. All have 6mm...

Tool Holders, 6mm Thread - Medium Flat 1.5mm

sku: 5083504

Create your own polishing tools by inserting stones and lapping tools into these steel clamps. All of these Clamp Tool Holders can be used in the standardultrasonic handpeices supplied with ULTRAMAXDF, SF, DF Power, and SF Power. All have 6mm...

Tool Holders, 6mm Thread - Medium Flat 2mm

sku: 5083506

Create your own polishing tools by inserting stones and lapping tools into these steel clamps. All of these Clamp Tool Holders can be used in the standardultrasonic handpeices supplied with ULTRAMAXDF, SF, DF Power, and SF Power. All have 6mm...

Tool Holders, 6mm Thread - Medium Flat 3.3mm

sku: 5083514

Create your own polishing tools by inserting stones and lapping tools into these steel clamps. All of these Clamp Tool Holders can be used in the standardultrasonic handpeices supplied with ULTRAMAXDF, SF, DF Power, and SF Power. All have 6mm...

Tool Holders, 6mm Thread - Medium Flat 3mm

sku: 5083510

Create your own polishing tools by inserting stones and lapping tools into these steel clamps. All of these Clamp Tool Holders can be used in the standardultrasonic handpeices supplied with ULTRAMAXDF, SF, DF Power, and SF Power. All have 6mm...

Tool Holders, 6mm Thread - Round 2.35mm

sku: 5083509

Create your own polishing tools by inserting stones and lapping tools into these steel clamps. All of these Clamp Tool Holders can be used in the standardultrasonic handpeices supplied with ULTRAMAXDF, SF, DF Power, and SF Power. All have 6mm...

Tool Holders, 6mm Thread - Round 2mm

sku: 5083508

Create your own polishing tools by inserting stones and lapping tools into these steel clamps. All of these Clamp Tool Holders can be used in the standardultrasonic handpeices supplied with ULTRAMAXDF, SF, DF Power, and SF Power. All have 6mm...

Tool Holders, 6mm Thread - Round 3.3mm

sku: 5083516

Create your own polishing tools by inserting stones and lapping tools into these steel clamps. All of these Clamp Tool Holders can be used in the standardultrasonic handpeices supplied with ULTRAMAXDF, SF, DF Power, and SF Power. All have 6mm...

Tool Holders, 6mm Thread - Round 3mm

sku: 5083512

Create your own polishing tools by inserting stones and lapping tools into these steel clamps. All of these Clamp Tool Holders can be used in the standardultrasonic handpeices supplied with ULTRAMAXDF, SF, DF Power, and SF Power. All have 6mm...

Tool Holders, 6mm Thread - Round 4mm

sku: 5083520

Create your own polishing tools by inserting stones and lapping tools into these steel clamps. All of these Clamp Tool Holders can be used in the standardultrasonic handpeices supplied with ULTRAMAXDF, SF, DF Power, and SF Power. All have 6mm...

Tray Arm MAAH-T for Foredom® Bench System

sku: 8500536

Who doesn't need more room at the bench? Keep your most frequently used tools within easy reach and off the benchtop with Foredom's new Bench System.   Select any of the components (LED Light Bar and your choice of stainless steel Tool...

Tubine Assembly for TLL-03 UHT Ushio TurboLap Air Filer

sku: 8502357

Turbine Assembly for TLL-07 UHT Ushio TurboLap Air Filer

sku: 8502358

Turbine Assembly for TLL-12 UHT Ushio TurboLap Air Filer

sku: 8502359

Turbo Air Lapper UTR-70

sku: 8502245

Low-vibration, quiet-running, durable reciprocating handpiece with 0.7mm stroke. Excellent for general-purpose finishing and polishing of mold and die surfaces. Perfect for polishing ribs, slots and other tight areas. Produces great results with Diamond...

UHT Ushio Contra-Angle Air Grinder with 1/8" Collet

sku: 8500905

Quiet running, 53,000RPM Contra Angled (120°) handpiece provides access to hard-to-reach areas making it ideal for many applications, including precision grinding, finishing and polishing. Feature self-lubricating vanes for dependable performance...

UHT Ushio Contra-Angle Air Grinder with 3mm Collet

sku: 8500906

Quiet running, 53,000RPM Contra Angled (120°) handpiece provides access to hard-to-reach areas making it ideal for many applications, including precision grinding, finishing and polishing. Feature self-lubricating vanes for dependable performance. Unique...

UHT Ushio HTSG-32S High Torque 1/8" Straight Grinder

sku: 8500955

You will find this is the most powerful High Torque Air Grinder in our UHT Air Micro Grinder Series. Even under load, the high torque and 24,000rpm will handle both deburring and polishing tasks with ease.  1/8" collet.  Air pressure 0.4MPa,...